<--Previous  Up  Next-->

press1

Positioning the strut to be pressed

This strut is in the correct position to be pressed. Notice that the mark which identifies the location of the seam is at 45 degrees to horizontal. In fact, any 45 degree location is fine. In otherwords, if the end of the pipe was a clock, it could be at 1:30, 4:30, 7:30 or 10:30.

If you put the mark at 3:00, 6:00, 9:00 or 12:00 the pipe will split.


All information herein copyright 2007 by Howard Cohen
hoco@timefold.com